Manufacturer: WFL MILLTURN
type: M 65 x 300
Year built : 2003
Delivery time: 06.2015
Delivery: EX Factory Location
Turning diameter 820 mm
Turning length 3070 mm
Control Siemens 840 D
Operating voltage 3 x 400/50 V / Hz
Total power requirement 112 kVA
Machine’s weight about t
Dimensions approx 12.0 x 4.2 x 3.5 m
Bezel 175-510 (SMW) mm
Spann-force three-jaw chuck 500 (SMW) mm
The machine can be viewed by appointment at any time under power.
Control: CNC
Warehouse in : Europe
Origin: Austria
Description:
The machine is in a very good condition.
A current measurement protocol can be sent.
A tour under current / tension in Abgeberwerk is available by appointment.
CNC turning / drilling milling center with tailstock and control Siemens Sinumerik 840D
Workspace: Length 3000 mm
Swing over bed / carriage 820/820 mm D
rehdurchmesser over bed / carriage 820/800 mm
Diameter restrictions Cross slide with coupling means 750 mm
Swing over carriage 650 mm steadies
Longitudinal travel (Z) 3150 mm Transverse stroke (X) 720 mm Distance spindle nose to tailstock 3470 mm
Turning length (clamping devices dependent) about 3070 mm
Workpiece weight between centers max. 2500 kg
Workpiece weight between centers with lunettes support max. 3200 kg
Workpiece weight flying max. 800 kg
Workpiece weight flying with lunettes support max. 2500 kg
Rotating spindle: spindle head DIN 55026
Form A size 15
Spindle diameter in front bearing 240 mm
Spindle bore 165-145 mm
Main drive: AC drive with 2-stage gearbox
Motor power 100%
ED 60 kW
Max. Spindle speed 2600 1 / min.
Max. Torque on the spindle 100%
ED 2748 Nm Feed drive:
Cross slide, rotary drilling milling unit AC servo drive feed force along (Z) 20 kN Feed force plan (X) 20 kN Feed force 15 kN Y axis rapid traverse: longitudinal (Z) 20 m / min. Plan (X) 15 m / min. B-axis 90 ° / s ball screw: longitudinal (Z) Drm. 63 x 20 mm Plan (X) Drm. 63 x 10 mm
Tailstock: Quill diameter 180 mm
Quill stroke 200 mm
Pinole with built storage MK 6
Toolholder: single toolholder, rotary drilling milling unit AC drive, drive power 100%
ED 17/25 kW
Spindle speed max. 4000 1 / min.
Max. Torque on the spindle 100%
ED 210/300 Nm
Off perpendicular to the X / Z plane (Y-axis) 500 (-200 / + 300) mm
Swivel angle of the milling spindle (B-axis) -110 / + 90 °
Spindle head for tools according to DIN 69893
Spindle diameter in front bearing 100 mm
Temperature stabilization: By controlled cooling circuit with compressor cooling unit
External tool magazine: memory locations (location-coded) size 80 (C8) 108 pieces Maximum tool diameter not adjacent 200 mm.
Max. Tool diameter adjacent 110 mm
Max. Tool length 500 mm 2 1 drum drum drum 500/900/500 mm 3 mm 500/900/250/250
C-axis servo-controlled main spindle: Smallest programmable increment 0.001 ° Max speed 20 1 / min.. Max. Torque on the spindle 100% ED 3000 Nm
Holding torque of 4,000 Nm Disc Brake
Techn. Facts and state information subject to change without obligation or liability, prior sale.
PRICE EX WORKS EUROPE : On request*
* machine available except selling meanwhile
