| Maximum Swing : 450 mm |
450 |
mm |
| Maximum Swing over saddle : 390 mm |
390 |
mm |
| Maximum Turning Diameter : 390 mm |
390 |
mm |
| Maximum turning diameter on sub spindel : 100 mm |
100 |
mm |
| Maximum spindle bore for bar work : 65 mm |
65 |
mm |
| Min/Max.distance between chuck of both spindles : 500 mm |
500 |
mm |
| Spindle speed : Main Spindle 30-4000 Rpm |
Main Spindle |
30-4000 |
Rpm |
| Spilnose taper : A2-8 |
Main Spindle |
A2-8 |
| Spindle motor : Main Spindle 30 min/continue 15/11 Kw |
Main Spindle 30 min/continue |
15/11 |
Kw |
| Maximum torque on spindle : |
Main Spindle |
Nm |
| Spindle speed : Sub Spindle 30-5000 Rpm |
Sub Spindle |
30-5000 |
Rpm |
| Spilnose taper : Sub Spindle diam 85 mm |
Sub Spindle |
ø 85 flat |
mm |
| Spindle motor : Sub Spindle 30 min/continue 3,7/2,2 Kw |
Sub Spindle 30 min/continue |
3,7/2,2 |
Kw |
| Maximum torque on spindle |
Sub Spindle |
Nm |
| Spindle speed driven Tools : 100-3000 Rpm |
100-3000 |
Rpm |
| Motor driven Tools : 30 min/continue 3,7/2,2 Kw |
30 min/continue |
3,7/2,2 |
kW |
| Torque motor driven tools |
Nm |
| X-Axis movement : 265 mm |
265 |
mm |
| Y-Axis movement : +/- 60 (120) mm |
± 60 (120) |
mm |
| Z-Axis movement : 530 mm |
530 |
mm |
| W-axis movement (subspindle to mainspindle) : 600 mm |
600 |
mm |
| Minimum indexing C-Axis maim Spindle |
° |
| Minimum Indexing C Axis Sub Spindel : 5° |
5 |
° |
| Cutting feedrate X-Axis : 0,01 – 500 mm/rpm |
0,01 – 500 |
mm/rpm |
| Cutting feedrate Y-Axis : 0,01 – 500 mm/rpm |
0,01 – 500 |
mm/rpm |
| Cutting feedrate Z-Axis : 0,01 – 500 mm/rpm |
0,01 – 500 |
mm/rpm |
| Cutting feedrate Sub spindle (B-Axis) : 0,01 – 500 mm/rpm |
0,01 – 500 |
mm/rpm |
| Cutting feedrate C-Axis : 0-2000 °/min |
0-2000 |
°/min |
| Rapid traverse X-Axis : 25 m/min |
25 |
m/min |
| Rapid traverse Y-Axis : 30 m/min |
30 |
m/min |
| Rapid traverse Z-Axis : 10 m/min |
10 |
m/min |
| Rapid traverse W-Axis : 24 m/min |
24 |
m/min |
Rapid Speed C-Axis : 100 rpm
| Number of tools on turret / Driven |
16/16 |
| Tool type |
VDI-40 |
| Turret indexing 1 pos /180 degr |
sec |
| Size of turning tool |
20×20 |
mm |
| Boorbar size |
25 |
mm |
| Max. Diameter Driven Drill |
12 |
mm |
| Max. Diameter Mill Driven Tool |
12 |
mm |
| Maximum tapping Driven Tool |
M 10 |
| Required floorspace |
width x depth |
3515 x 2165 |
mm |
| Height |
1875 |
mm |
| Weight |
5250 |
kg |
| Complet with |
Collet chuck Kitagawa CRL 65-A8, with 6 collets |
| C-axis control for main spindle |
| Disc brake for rotary tools |
| B204 Kitagawa chuck for sub spindle (110 mm) with soft jaws |
| Index unit for sub spindle |
| Part catcher |
| Q setter (automatic tool measurement) |
| Chip conveyor right side |
| LNS Quick load servo short barfeeder with magazine |
| complet coolant installation |
| Complete set of manuals in Englisch |
| Tooling: |
4x Axial driven tool |
| 1x Radial driven tool |
| 6x Turning holder |
| 4x Boring bar holder |
| 4x enlarged turning holder |
| 3x enlargerd boring bar holder |
| 1x Cut off holder |
| 1x Tool length stop |
| 8x Turret close dop |
|
100 |
rpm |
