Manufacturer: WFL MILLTURN
type: M 65 x 300

Year built : 2003

Delivery time: 06.2015

Delivery: EX Factory Location

Turning diameter 820 mm

Turning length 3070 mm

Control Siemens 840 D

Operating voltage 3 x 400/50 V / Hz

Total power requirement 112 kVA

Machine’s weight about t

Dimensions approx 12.0 x 4.2 x 3.5 m

Bezel 175-510 (SMW) mm

Spann-force three-jaw chuck 500 (SMW) mm

The machine can be viewed by appointment at any time under power.

Control: CNC

Warehouse in : Europe

Origin: Austria

Description:

The machine is in a very good condition.

A current measurement protocol can be sent.

A tour under current / tension in Abgeberwerk is available by appointment.

CNC turning / drilling milling center with tailstock and control Siemens Sinumerik 840D

Workspace: Length 3000 mm

Swing over bed / carriage 820/820 mm D

rehdurchmesser over bed / carriage 820/800 mm

Diameter restrictions Cross slide with coupling means 750 mm

Swing over carriage 650 mm steadies

Longitudinal travel (Z) 3150 mm Transverse stroke (X) 720 mm Distance spindle nose to tailstock 3470 mm

Turning length (clamping devices dependent) about 3070 mm

Workpiece weight between centers max. 2500 kg

Workpiece weight between centers with lunettes support max. 3200 kg

Workpiece weight flying max. 800 kg

Workpiece weight flying with lunettes support max. 2500 kg

Rotating spindle: spindle head DIN 55026

Form A size 15

Spindle diameter in front bearing 240 mm

Spindle bore 165-145 mm

Main drive: AC drive with 2-stage gearbox

Motor power 100%

ED 60 kW

Max. Spindle speed 2600 1 / min.

Max. Torque on the spindle 100%

ED 2748 Nm Feed drive:

Cross slide, rotary drilling milling unit AC servo drive feed force along (Z) 20 kN Feed force plan (X) 20 kN Feed force 15 kN Y axis rapid traverse: longitudinal (Z) 20 m / min. Plan (X) 15 m / min. B-axis 90 ° / s ball screw: longitudinal (Z) Drm. 63 x 20 mm Plan (X) Drm. 63 x 10 mm

Tailstock: Quill diameter 180 mm

Quill stroke 200 mm

Pinole with built storage MK 6

Toolholder: single toolholder, rotary drilling milling unit AC drive, drive power 100%

ED 17/25 kW

Spindle speed max. 4000 1 / min.

Max. Torque on the spindle 100%

ED 210/300 Nm

Off perpendicular to the X / Z plane (Y-axis) 500 (-200 / + 300) mm

Swivel angle of the milling spindle (B-axis) -110 / + 90 °

Spindle head for tools according to DIN 69893

Spindle diameter in front bearing 100 mm

Temperature stabilization: By controlled cooling circuit with compressor cooling unit

External tool magazine: memory locations (location-coded) size 80 (C8) 108 pieces Maximum tool diameter not adjacent 200 mm.

Max. Tool diameter adjacent 110 mm

Max. Tool length 500 mm 2 1 drum drum drum 500/900/500 mm 3 mm 500/900/250/250

C-axis servo-controlled main spindle: Smallest programmable increment 0.001 ° Max speed 20 1 / min.. Max. Torque on the spindle 100% ED 3000 Nm

Holding torque of 4,000 Nm Disc Brake

Techn. Facts and state information subject to change without obligation or liability, prior sale.
PRICE EX WORKS EUROPE : On request*
* machine available except selling meanwhile